Table des matières

Installation de Gentoo sur un Acer Aspire V3-571G-73638G1TMAII

Caractéristiques

Partitionnement

Pour un disque de 1To:

  /dev/sda1 : 50Mo /boot
  /dev/sda2 : 8Go swap
  /dev/sda3 : 1Go /
  /dev/sda4 : 990Go LVM

Avec LVM (http://www.gentoo.org/doc/fr/lvm2.xml):

  /home : 890Go
  /usr : 20Go
  /var : 50Go
  /tmp : 5Go
  /opt : 20Go

Environnent d'install

Carte graphique Optimus

Touchpad

Config kernel:

Device Drivers  --->
  Input device support  --->
    -*- Generic input layer (needed for keyboard, mouse, ...)
    [*]   Mice  --->
       <*>   PS/2 mouse
       [*]     Elantech PS/2 protocol extension

Désactivation du touchpad au branchement d'une souris USB

/etc/udev/rules.d/01-touchpad.rules:

ACTION=="add", ATTRS{bInterfaceClass}=="03", ATTRS{bInterfaceSubClass}=="01", ATTRS{bInterfaceProtocol}=="02", ENV{DISPLAY}=":0", ENV{XAUTHORITY}="/home/username/.Xauthority", ENV{REMOVE_CMD}="/usr/bin/synclient TouchpadOff=0", RUN+="/usr/bin/synclient TouchpadOff=1"

Camera

Kernel:

Device Drivers  --->
   <*> Multimedia support  --->
      [*]   Media USB Adapters  --->
         <*>   USB Video Class (UVC)

/etc/portage/make.conf : activer le useflag v4l

Son

lspci -v | grep -i audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)

Config kernel:

Device Drivers  --->
   <*> Sound card support  --->
      <*>   Advanced Linux Sound Architecture  --->
          [*]   PCI sound devices  --->
              <M>   Intel HD Audio  --->
      < >   Open Sound System (DEPRECATED)  --->

Chargement du module (/etc/conf.d/modules) :

modules="snd-hda-codec"

Wifi

$ lspci -k
03:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
Subsystem: Foxconn International, Inc. Device e052

Config kernel :

Device Drivers  --->
  [*] Network device support  --->
     [*]   Wireless LAN  --->
        <M>   Atheros Wireless Cards  --->
           <M>   Atheros 802.11n wireless cards support
           [*]     Atheros ath9k PCI/PCIe bus support

Chargement du module (/etc/conf.d/modules) :

# Wifi
modules="ath9k"